The Whaley Rail Flip Open Clamp Reducers are 3D printed, snap fit reducers that adapt the Flip Open Clamp to other industry standard OD tubing on C-stands, rolling stands and carts. Two identical reducer pieces are included in each kit to snap onto either side of the clamp (clamp body and clamp tab).

The reducers are available for imperial based diameters in 1.25″, 1″ and 0.75″, as well as metric based diameters in 35mm, 30mm and 25mm.

For the 1″, 0.75″, 30mm and 25mm reducer sizes, coloured O-rings (red, blue, green and yellow) are provided to colour code the reducers if desired. The O-ring can be cut into four pieces and pushed into the slots on the reducer.

The Whaley Rail Flip Open Clamp provides an ARRI 3/8 pin-loc mounting pattern for mounting accessories to 1.5″ OD (outer diameter) round posts. Make use of this ARRI 3/8 pin-loc pattern to attach ARRI based Rudy Arm components or third party mini quick release systems such as LNKCine and Wedgie2.

The Whaley Rail Flip Open Clamp is designed to quickly release and clamp to 1.5″ OD (outer diameter) vertical posts, such as our Whaley Rail vertical post or Inovativ cart legs. The flip open clamp design allows the clamp to be installed directly over the post, without having to slide it from the end of the tubing.

Adapt to other tubing diameters with our Whaley Rail Flip Open Clamp Reducers, available in 1.25″, 1″, 0.75″, 35mm, 30mm, and 25mm sizes.

The Whaley Rail Flip Open Clamp to ProBurger Slim Half Coupler is a useful rigging accessory to help grips rig your cart or Whaley Rail frame into a process trailer. Utilize the swivel connection to set the speed rail at any angle.

The Whaley Rail Flip Open Clamp is designed to quickly release and clamp to 1.5″ OD (outer diameter) vertical posts, such as our Whaley Rail vertical post or Inovativ cart legs. The flip open clamp design allows the clamp to be installed directly over the post, without having to slide it from the end of the tubing.

The ProBurger Slim Half Coupler clamp is used to clamp to 1-1/4″ (1.66″ OD) and 1-1/2″ (1.9″ OD) speed rail.

Adapt to other tubing diameters with our Whaley Rail Flip Open Clamp Reducers, available in 1.25″, 1″, 0.75″, 35mm, 30mm, and 25mm sizes.

The Whaley Rail Flip Open Corner Clamp is designed to quickly release and clamp to 1.5″ OD (outer diameter) vertical posts, such as our Whaley Rail vertical post or Inovativ cart legs. The flip open clamp design allows the clamp to be installed directly over the post, without having to slide it from the end of the tubing. The clamp is used to hold our 1″ round-edge square tubing from our Whaley Rail horizontal rail and Laptop Swing Arm.

The Whaley Rail Flip Open Corner Clamp is available as a single clamp or as a set of two.

The single clamp is ideal for past Laptop Swing Arm users to make use of the flip open corner clamp.

The set of clamps are available for those looking to add extra hardware alongside their existing Whaley Rail frame system. To add a horizontal cross rail, check out our Whaley Rail II – Horizontal Rail.

Adapt to other tubing diameters with our Whaley Rail Flip Open Clamp Reducers, available in 1.25″, 1″, 0.75″, 35mm, 30mm, and 25mm sizes.

The Laptop Swing Arm is a compact option for securing a laptop tray to vertical posts that are 1.5″ in diameter. Our Flip Open 1.5 Corner Clamp is designed to quickly release and clamp to 1.5″ OD (outer diameter) vertical posts, such as our Whaley Rail vertical post or Inovativ cart legs.

The flip open clamp design allows the clamp to be installed directly over the post, without having to slide it from the end of the tubing.

Two 7″ lengths of 1″ aluminum extruded square tubing are connected with a preloaded friction hinge. Mount a laptop tray with a spigot adapter to the included 3″ length 5/8 baby pin.

Adapt to other tubing diameters with our Whaley Rail Flip Open Clamp Reducers, available in 1.25″, 1″, 0.75″, 35mm, 30mm, and 25mm sizes.