The DIT BOX Mk5 and previous DIT BOX systems have been built specifically as live grade systems that house a precise amount of components for a 4 camera workflow. However, in the past and more recently we have had several clients reach out about customizing a DIT BOX for their specific needs (ie. Qtake/Video Assist system). Others may prefer a paired down version of our DIT BOX to build their own power cables or take the base structure and build out a custom setup. With this round of pre orders, we’re excited to offer the DIT BOX – Base for those looking to build something unique to their needs.

The DIT BOX – Base is built into a heavily modified Pelican Air 1535 that can easily be packed into remote locations. The custom modified Pelican case features a removable top lid, removable BNC panel cover for transport and a modified backside to accommodate a 120mm fan and 24x Neutrik D-Series connector (almost the same I/O as most DIT carts). Side, back, and 2 front mounted cheese plates with ARRI 3/8-16″ and SmallHD 1/4-20″ Pin-Loc patterns, allow for mounting additional accessories.

The DIT BOX – Base has a removable machined aluminum frame that helps keep mounted electronics cooler and allows for easy access when service is needed. The aluminum frame is a two shelf system that has four standoffs that space off the lower and upper shelf. Two heights of standoffs are supplied in order to adjust the shelf spacing from 1.75″ to 1.375″. The bracketry has a 2U rack opening, designed specifically to mount an AJA Kumo 3232 or 1616. The aluminum bracketry comes with mounting patterns on the two shelves to fit devices from our DIT BOX Mk5, however certain adjustments can be made to build out a different system.

The DIT BOX aluminum inner bracketry mounts the following devices:
FSI Box IO (not included) mounting to lower shelf
AJA KUMO 3232 or KUMO 1616 (not included) mounting to 2U rack opening
CalDigit TS4+ (not included) CalDigit TS3 is also still supported. mounting to side bracket. TS4 can be mounted wiith our new keyhole release bracket, while the TS3 needs to be direct mounted.
NetGear GS105 (not included) mounting to lower shelf by modifying Netgear slightly to slot onto screws.
Decimator DMON-QUAD (not included) mounting to Sonnett mounting enclosure lid, upper shelf or lower shelf
Sonnett Express SE I (not included) with our custom mounting enclosure to upper shelf.
DC Regulator & Distribution Box (not included) mounting to upper or lower shelf (if no upper shelf is used).

Build out the DIT BOX – Base, by purchasing desired add-ons separately, such as the DC Regulator and Distribution Box, Sonnet Echo Express (with custom mounting enclosure), 2pin Lemo cables, among others (see the DIT BOX – Base Optional Add-ons for more information)

The Laptop Tray mounts to the DIT BOX laptop brackets to securely mount a 13″, 15″ or 16″ Macbook Pro. Optional accessories for the Laptop Tray are available for mounting to baby pin with a spigot adapter using our Quick Release VESA plate.

The base of the DIT BOX features a bottom bracket for mounting an optional spigot mount, a Ronford Baker QR plate or the Upgrade Innovations QR VESA Plate. The DIT BOX base is also equipped with longer feet to allow your DIT Box to rest sturdily when a Upgrade Innovations QR plate is mounted underneath.

Tip: When determining if components will fit into the DIT BOX, it’s crucial to consider not only the dimensions of the component, but also the I/O locations and how cables/connectors add to the overall size, as well as, the mounting patterns (if applicable) and how this impacts the orientation of how it can mount.

What comes in the DIT BOX – Base

• Modified Pelican 1535 Air with Removable Lid
• DIT BOX Custom Internal Frame
• Laptop Tray with Laptop Clamps and Shim
• Bottom Bracket with 3/8-16 and Vesa Mounting Points
• Rear BNC Panel with 24 slots for Neutrik D-Series connectors (Neutrik connectors not included)
• 120mm Fan (note, requires power from a source such as our DC Distribution Box – via 3pin connector)
• BNC Panel Label Plates
• Delrin Feet
• NEW* Two heights of standoffs to adjust Upper shelf height (1.75″ and 1.375″)
• NEW* 4x Outer Cheese Plate with ARRI 3/8-16” and SmallHD 1/4-20” Pin-Loc mounting
• NEW* CalDigit TS4 Keyhole bracket for efficient access & release from DIT BOX

Please note that the DIT BOX DOES NOT ship with the following components: FSI BOX IO, CalDigit, AJA KUMO, Decimator, or Black Magic Quad 2 or Duo 2. We build the box to house these components.
Please purchase these devices separately from an authorized local supplier.

The DIT BOX – Base also does not include the electrical components and cables from the DIT BOX Mk5, such as the DC Distribution Box, Sonnet enclosure, power cables and other items. These can be added as optional add-ons to build your bespoke build.

Approx DIT BOX – Base weight 16Ibs / 7.3Kg

Take your live grading and monitoring station anywhere a camera can go.

The DIT BOX is a collaborative design between credited Digital Imaging Technician, Chris Bolton, & the Upgrade Innovations Team.

The DIT BOX Mk5 is a portable Live Grade system to take your live grading and monitoring setup anywhere a camera can go. The DIT BOX is designed to fit all the essential live grading tools for up to 4 cameras (or up to 6 with available add-ons) into a Pelican Air 1535, that can easily be packed into remote locations.

The DIT BOX is powered by a custom, Cramped Attic – 24 volt power distribution module with separate 20V and 12V kill switches and fan controller. With a primary and secondary 24V input, you can swap power inputs without components losing power.

The custom modified Pelican case features a removable top lid, removable BNC panel cover for transport and a modified backside to accommodate a 120mm fan and 24x Neutrik D-Series connector (almost the same I/O as most DIT carts). Side, back, and 2 front mounted cheese plates with ARRI 3/8-16″ and SmallHD 1/4-20″ Pin-Loc patterns, allow for mounting additional accessories.

The DIT BOX has a removable machined aluminum frame that helps keep mounted electronics cooler and allows for easy access when service is needed. The aluminum inner bracketry mounts the following devices:

FSI Box IO (not included): Live grade up to 4 cameras with two BoxIOs. Add 2 more camera feeds with an optional 3rd BoxIO. For HD HDR workflows run with 2 box IO’s for full 3 cube Tetrahedral colour.
AJA KUMO 3232 or KUMO 1616 (not included): allows for up to 32 in and 32 out HD signals. Use the built in WEB GUI for signal control, or live grade studios built in software controls or add on a Stream deck for physical assignable buttons.
CalDigit TS4+ (not included): Adds Thunderbolt 4 support, additional I/O and additional charging power for Apple silicon laptops. CalDigit TS3 is also still supported.
NetGear GS105 (included): allows for network control of all internal devices via the Macbook Pro’s single Thunderbolt 3 port.
Decimator DMON-QUAD (not included): For SDI multiview.
Sonnett Express SE I (included): Add most single lane capture cards to the DIT BOX including the popular Black Magic DeckLink Quad 2 for 8 channels of HD video I/O or a DeckLink Duo 2 card for 4 channels of HD video I/O.
*Please also note that the daughter board has been removed so ONLY single slot capture cards are supported.

The Laptop Tray mounts to the DIT BOX laptop brackets to securely mount a 13″, 15″ or 16″ Macbook Pro. Optional accessories for the Laptop Tray are available for mounting to baby pin with a spigot adapter using our Quick Release VESA plate.

The base of the DIT BOX features a bottom bracket for mounting an optional spigot mount, a Ronford Baker QR plate or the Upgrade Innovations QR VESA Plate. The DIT BOX base is also equipped with longer feet to allow your DIT Box to rest sturdily when a Upgrade Innovations QR plate is mounted underneath.

What comes in the DIT BOX Mk5

• Modified Pelican 1535 Air with Removable Lid
• DIT BOX Custom Internal Frame
• Laptop Tray with Laptop Clamps and Shim
• Bottom Bracket with 3/8-16 and Vesa Mounting Points
• Delrin Feet
• Rear BNC Panel Cover Plate
• 120mm Silent Fan & Fan Guards
• NEW* 4x Outer Cheese Plate with ARRI 3/8-16” and SmallHD 1/4-20” Pin-Loc mounting
• NEW* CalDigit TS4 Keyhole bracket for efficient access & release from DIT BOX
• BNC Panel Label Plates
• 24x Neutrik D-Series Connectors (2x Power, 1x Ethernet and 21x BNC)
• Sonnet Echo Express 1 and custom mounting enclosure
• DC Regulator and Distribution box with built in fan
• 24Volt 350 Watt Power Supply with AC cable and Mounting Bracket
• CalDigit power cable to XLR
• AJA Kumo power cable
• Sonnet PCIE card enclosure power cable
• Power cables for two Box IO’s to LEMO connector
• Decimator power cable to LEMO connector
• Open lead power cable to LEMO connector
• 24 volt 6’ power extension cable
• NetGear Prosafe GS105 with 5x Ethernet Cables
• 30x 12G Rated Straight to Straight BNC Cables
• 16x 12G Rated Angle BNC Cables

Please note that the DIT BOX DOES NOT ship with the following components: FSI BOX IO, CalDigit, AJA KUMO, Decimator, or Black Magic Quad 2 or Duo 2. We build the box to house these components.
Please purchase these devices separately from an authorized local supplier.

Approx 44Ibs / 20kg with all devices installed