SKU 12990 and 13350 - Spigot Adapter to 15mm Ball-Loc Pivot Clamp
SKU 13495, 13525, 13530 - Spigot Mount to 1/4-20 and 3/8-16 Thread

The post Spigot Mount Tie Down Knob appeared first on Upgrade Innovations.

The Ball-Loc hinge design keeps your monitor secure from the static and dynamic forces when moving your DIT cart or rolling stand on set or on location. This innovative design is for heavier loads and long term use, assured by our lifetime warranty.

The MMS09 5/8″ Spigot – Ball-Loc model comes with no VESA plate. Order this version and add a VESA Plate separately. This model is ideal for users that are looking for a new spigot mount to transfer an existing Upgrade Innovations VESA plate to, or if users are looking to outfit a mount with a QR Receiver Plate or a QR-L/P Receiver Plate.

Mount wireless receivers, transmitters, antennas or other accessories directly to our Monitor Mounts using the 1/4-20, 3/8-16 or M5 non-twist threaded holes. See drop down menu below for further information regarding our non-twist mounting accessories.

Supports up to 77 lb/35kg.

Made in Canada. NAFTA Qualified. CETA Qualified.

For those that need to purchase with a VESA plate, consider our other MMS09 models.

For those that prefer fine view-angle adjustment, consider our Friction-Loc models.

For those that prefer further articulation and adjustment potential, consider our MMS11-MC Twin-Hinge Ball-Loc models.

[learn_more caption="Consider mounting accessories via M5 non-twist baby pin or 15mm spud"]

MMS 5/8 Baby Pin Non-Twist – M5 (link)

The MMS 5/8 Non-Twist Baby Pin can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5/32 or 4mm Hex Key. Once mounted, the top of the 5/8 Baby Pin also provides a 3/8 tapped thread for mounting accessories.

MMS 15mm Mounting Spud Non-Twist – M5 (link)

The MMS 15mm Non-Twist Mounting Spud can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5/32 or 4mm Hex Key. Once mounted, the top of the 15mm Mounting Spud also provides a 3/8 tapped thread for mounting accessories. Spuds come with captive and friction o-rings to keep accessories in place while adjusting or loosening.

Select either mounting standard to mount accessories with 15mm or 5/8 baby pin standard components. Pair either accessory with our Rudy Arm articulating arm for endless mounting options.

[/learn_more]

[learn_more caption="Consider for SmallHD 4K Production Monitors"]

The SmallHD 4K Standard VESA Plate Spacers + Thumbscrews (link) to clear away the VESA plate from the SmallHD 4K monitor VESA/fan arrangement by an additional 3/8″ (10mm) spacing.

[/learn_more]

[learn_more caption="Consider our Baby Pin Pan Lock Clamp"]

The Baby Pin Pan Lock Clamp (link) limits the mount from panning on the baby pin and will keep monitors in the desired orientation.

[/learn_more]

The post MMS09 5/8″ Spigot – Ball-Loc appeared first on Upgrade Innovations.

The Friction-Loc hinge design features our industry strong friction disks, providing a strong hold and convenience to set your monitor in almost any viewing position. The system is best for fine adjustments.

The MMS12 5/8″ Spigot – Friction-Loc model comes with no VESA plate. Order this version and add a VESA Plate separately. This model is ideal for users that are looking for a new spigot mount to transfer an existing Upgrade Innovations VESA plate to, or if users are looking to outfit a mount with a QR Receiver Plate or a QR-L/P Receiver Plate.

Mount wireless receivers, transmitters, antennas or other accessories directly to our Monitor Mounts using the 1/4-20, 3/8-16 or M5 non-twist threaded holes. See drop down menu below for further information regarding our non-twist mounting accessories.

Supports up to 45 lb/20kg.

Made in Canada. NAFTA Qualified. CETA Qualified.

For those that need to purchase with a VESA plate, consider our other MMS12 models.

For mobile cart applications where superior hold for higher load rating is needed, consider our Ball-Loc models.

For those that prefer further articulation and adjustment potential, consider our MMS11 Twin-Hinge Friction-Loc models.

[learn_more caption="Consider mounting accessories via M5 non-twist baby pin or 15mm spud"]

MMS 5/8 Baby Pin Non-Twist – M5 (link)

The MMS 5/8 Non-Twist Baby Pin can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5/32 or 4mm Hex Key. Once mounted, the top of the 5/8 Baby Pin also provides a 3/8 tapped thread for mounting accessories.

MMS 15mm Mounting Spud Non-Twist – M5 (link)

The MMS 15mm Non-Twist Mounting Spud can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5/32 or 4mm Hex Key. Once mounted, the top of the 15mm Mounting Spud also provides a 3/8 tapped thread for mounting accessories. Spuds come with captive and friction o-rings to keep accessories in place while adjusting or loosening.

Select either mounting standard to mount accessories with 15mm or 5/8 baby pin standard components. Pair either accessory with our Rudy Arm articulating arm for endless mounting options.

[/learn_more]

[learn_more caption="Consider for SmallHD 4K Production Monitors"]

The SmallHD 4K Standard VESA Plate Spacers + Thumbscrews (link) to clear away the VESA plate from the SmallHD 4K monitor VESA/fan arrangement by an additional 3/8″ (10mm) spacing.

[/learn_more]

[learn_more caption="Consider our Baby Pin Pan Lock Clamp"]

The Baby Pin Pan Lock Clamp (link) limits the mount from panning on the baby pin and will keep monitors in the desired orientation.

[/learn_more]

The post MMS12 5/8″ Spigot – Friction-Loc appeared first on Upgrade Innovations.

The Ball-Loc hinge design keeps your monitor secure from the static and dynamic forces when moving your DIT cart or rolling stand on set or on location. This innovative design is for heavier loads and long term use, assured by our lifetime warranty.

The MMS11-MC 5/8″ Spigot – Twin Ball-Loc model comes with no VESA plate. Order this version and add a VESA Plate separately. This model is ideal for users that are looking for a new spigot mount to transfer an existing Upgrade Innovations VESA plate to, or if users are looking to outfit a mount with a QR Receiver Plate or a QR-L/P Receiver Plate.

Mount wireless receivers, transmitters, antennas or other accessories directly to our Monitor Mounts using the 1/4-20, 3/8-16 or M5 non-twist threaded holes. See drop down menu below for further information regarding our non-twist mounting accessories.

Supports up to 77 lb/35kg.

Made in Canada. NAFTA Qualified. CETA Qualified.

For those that need to purchase with a VESA plate, consider our other MMS11-MC models.

For those that prefer fine view-angle adjustment, consider our Friction-Loc models.

For those that prefer our single hinge models, consider our MMS09 Single-Hinge Ball-Loc models.

[learn_more caption="Consider mounting accessories via M5 non-twist baby pin or 15mm spud"]

MMS 5/8 Baby Pin Non-Twist – M5 (link)

The MMS 5/8 Non-Twist Baby Pin can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5/32 or 4mm Hex Key. Once mounted, the top of the 5/8 Baby Pin also provides a 3/8 tapped thread for mounting accessories.

MMS 15mm Mounting Spud Non-Twist – M5 (link)

The MMS 15mm Non-Twist Mounting Spud can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5/32 or 4mm Hex Key. Once mounted, the top of the 15mm Mounting Spud also provides a 3/8 tapped thread for mounting accessories. Spuds come with captive and friction o-rings to keep accessories in place while adjusting or loosening.

Select either mounting standard to mount accessories with 15mm or 5/8 baby pin standard components. Pair either accessory with our Rudy Arm articulating arm for endless mounting options.

[/learn_more]

[learn_more caption="Consider for SmallHD 4K Production Monitors"]

The SmallHD 4K Standard VESA Plate Spacers + Thumbscrews (link) to clear away the VESA plate from the SmallHD 4K monitor VESA/fan arrangement by an additional 3/8″ (10mm) spacing.

[/learn_more]

[learn_more caption="Consider our Baby Pin Pan Lock Clamp"]

The Baby Pin Pan Lock Clamp (link) limits the mount from panning on the baby pin and will keep monitors in the desired orientation.

[/learn_more]

The post MMS11-MC 5/8″ Spigot – Twin Ball-Loc appeared first on Upgrade Innovations.

The Friction-Loc hinge design features our industry strong friction disks, providing a strong hold and convenience to set your monitor in almost any viewing position. The system is best for fine adjustments. The two-point adjustment design, allows for unlimited viewing positions, making it a preferred mounting option.

The MMS11 5/8″ Spigot – Twin Friction-Loc model comes with no VESA plate. Order this version and add a VESA Plate separately. This model is ideal for users that are looking for a new spigot mount to transfer an existing Upgrade Innovations VESA plate to, or if users are looking to outfit a mount with a QR Receiver Plate or a QR-L/P Receiver Plate.

Mount wireless receivers, transmitters, antennas or other accessories directly to our Monitor Mounts using the 1/4-20, 3/8-16 or M5 non-twist threaded holes. See drop down menu below for further information regarding our non-twist mounting accessories.

Supports up to 40 lb/18kg.

Made in Canada. NAFTA Qualified. CETA Qualified.

For those that need to purchase with a VESA plate, consider our other MMS11 models.

For mobile cart applications where superior hold for higher load rating is needed, consider our Ball-Loc models.

For those that prefer our single hinge models, consider our MMS12 Single-Hinge Friction-Loc models.

[learn_more caption="Consider mounting accessories via M5 non-twist baby pin or 15mm spud"]

MMS 5/8 Baby Pin Non-Twist – M5 (link)

The MMS 5/8 Non-Twist Baby Pin can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5/32 or 4mm Hex Key. Once mounted, the top of the 5/8 Baby Pin also provides a 3/8 tapped thread for mounting accessories.

MMS 15mm Mounting Spud Non-Twist – M5 (link)

The MMS 15mm Non-Twist Mounting Spud can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5/32 or 4mm Hex Key. Once mounted, the top of the 15mm Mounting Spud also provides a 3/8 tapped thread for mounting accessories. Spuds come with captive and friction o-rings to keep accessories in place while adjusting or loosening.

Select either mounting standard to mount accessories with 15mm or 5/8 baby pin standard components. Pair either accessory with our Rudy Arm articulating arm for endless mounting options.

[/learn_more]

[learn_more caption="Consider for SmallHD 4K Production Monitors"]

The SmallHD 4K Standard VESA Plate Spacers + Thumbscrews (link) to clear away the VESA plate from the SmallHD 4K monitor VESA/fan arrangement by an additional 3/8″ (10mm) spacing.

[/learn_more]

[learn_more caption="Consider our Baby Pin Pan Lock Clamp"]

The Baby Pin Pan Lock Clamp (link) limits the mount from panning on the baby pin and will keep monitors in the desired orientation.

[/learn_more]

The post MMS11 5/8″ Spigot – Twin Friction-Loc appeared first on Upgrade Innovations.

For users looking to build a unique system, make use of additional Wireless Mounting Blocks to stack multiple wireless video systems to a single spigot mount and battery plate.

Battery Adapter Plates are not included.

The post Wireless and Battery Spigot Mounting System appeared first on Upgrade Innovations.

Battery Adapter Plates are not included.

The post Battery Mounting Plate to Spigot Adapter appeared first on Upgrade Innovations.

This Whaley Rail Clamp kit does not include a Whaley Pin-Loc Baby Pin. See our other available kits for our baby pin versions. This kit is ideal for those looking to add a Whaley Rail Clamp without a baby pin to their Whaley Rail frame system for other mounting setups.

Mount our innovative Whaley 3/8 Pin-Loc Baby Pin and/or our VESA Quick Release Plates, available separately.

The post Whaley Rail Clamp appeared first on Upgrade Innovations.

The post Whaley Rail Clamp to QR-L/P VESA Plate appeared first on Upgrade Innovations.

The Friction-Loc hinge design features our industry strong friction disks, providing a strong hold and convenience to set your monitor in almost any viewing position. The system is best for fine adjustments and gives you 360 degree position lock down. The two-point adjustment design, allows for unlimited viewing positions, making it a preferred mounting option.

The QR-L/P VESA mounting plate model combines the capabilities of the LP-Swinger model with the convenience of the Quick Release option. Keep setup and take-down time to a minimum, while making full use of the full monitor display screen by swinging your monitor from the landscape to portrait position.

Mount wireless receivers, transmitters, antennas or other accessories directly to our Monitor Mounts using the 1/4-20, 3/8-16 or M5 non-twist threaded holes. See drop down menu below for further information regarding our non-twist mounting accessories.

Supports up to 40 lb/18kg.

Weight: 0.880kg/1.940lbs

Made in Canada. NAFTA Qualified. CETA Qualified.

For those that prefer Standard VESA, Quick Release or Landscape/Portrait functionality, consider our other MMS11 models.

For mobile cart applications where superior hold for higher load rating is needed, consider our Ball-Loc models.

For those that prefer our single hinge models, consider our MMS12 Single-Hinge Friction-Loc models.

[learn_more caption="Consider mounting accessories via M5 non-twist baby pin or 15mm spud"]

MMS 5/8 Baby Pin Non-Twist – M5 (link)

The MMS 5/8 Non-Twist Baby Pin can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5/32 or 4mm Hex Key. Once mounted, the top of the 5/8 Baby Pin also provides a 3/8 tapped thread for mounting accessories.

MMS 15mm Mounting Spud Non-Twist – M5 (link)

The MMS 15mm Non-Twist Mounting Spud can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5/32 or 4mm Hex Key. Once mounted, the top of the 15mm Mounting Spud also provides a 3/8 tapped thread for mounting accessories. Spuds come with captive and friction o-rings to keep accessories in place while adjusting or loosening.

Select either mounting standard to mount accessories with 15mm or 5/8 baby pin standard components. Pair either accessory with our Rudy Arm articulating arm for endless mounting options.

[/learn_more]

[learn_more caption="Consider our Baby Pin Pan Lock Clamp"]

The Baby Pin Pan Lock Clamp (link) limits the mount from panning on the baby pin and will keep monitors in the desired orientation.

[/learn_more]

The post MMS11 VESA Monitor Mount to 5/8″ Spigot – Twin Friction-Loc – QR-L/P appeared first on Upgrade Innovations.