Description

The Double 6″ Rudy Arm – Arri ⅜ to SmallHD & Arri ¼ is designed with industry standard Arri 3/8 pin-loc,  Arri 1/4 pin-loc and SmallHD 1/4 pin-loc mounting options – with three independent locking pivot points for local control and two 6″ length 15mm rods.

Solid mount on both ends and prevent unintentional loosening of mounted accessories with our Arri 3/8, Arri 1/4 and SmallHD 1/4 pin-loc 15mm mounting spuds. Both Arri 1/4 and SmallHD 1/4 15mm mounting spuds are provided to accommodate mounting to various monitors and accessories. Pair the Arri ⅜ pin-loc 15mm spud with Arri patterned Wedgie2 and LNKCINE for quick release mounting. 

Supports up to 6.8kg / 15lbs
Total Reach of 33 cm / 13”
Weight: 0.36kg / 0.79 lbs  

The Double 6″ Rudy Arm – Arri ⅜ to SmallHD & Arri ¼ includes:

2x 15mm 3/8 Threaded Rod – 8″ Length
Lightweight and durable with female ⅜ thread on both ends

2x 15mm Pivot Clamp Ball-Loc with Adjustable Lever
Use as anchor points for superior hold

1x 15mm Pivot Clamp Friction-Loc with Adjustable Lever
Ideal on monitor or accessory side for fine adjustments

1x Arri ⅜” Pin-Loc 15mm Spud – 2.9″

1x Arri ¼”  Pin-Loc 15mm Spud – 2.5″

1x SmallHD ¼″ Pin-Loc 15mm Spud – 2.5″

O-Ring Kit

Install the Arri 3/8,  Arri 1/4 and SmallHD 1/4 Pin-loc 15mm spuds with a 5/32 or 4mm hex key.

Add or remove sections of the arm with our unique O-Ring design. Remove larger, captive O-rings from the 15mm rod or spuds to remove/adjust sections of the arm. Smaller friction o-rings allow for controlled adjustments along the rods.  

The Rudy Arm system is interchangeable, so you can use this arm in conjunction with other Rudy Arm components and 15mm accessories. Build possibilities are truly endless with the entire arm being a 15mm mounting surface (always check load rating when re-configuring parts).

Solidly built with premium 6061 aircraft aluminum, Mil-Spec anodizing & stainless steel hardware.

Made in Canada. NAFTA Qualified. CETA Qualified.

Check out our other Rudy Arm Kits!