Use 2mm hex key to adjust SmallHD pins for SmallHD monitors.

Pair it with our RudyArm articulating arm for endless mounting options.

Solidly built with premium 6061 aircraft aluminum, Mil-Spec anodizing & stainless steel hardware.

Tighten and loosen baby pin using a 5/32 or 4mm Hex key.

Solidly built with Anodized Aircraft Aluminum.

Mounts to Leader 5350 model to the top side of the monitor with four screws (2x M3 and 2x M4 fasteners). Note, top handle needs to be removed to access required M4 mounting pattern.

Outfitted with industry standard SmallHD 1/4" Pin-Loc and ARRI 3/8" Pin-Loc to mount our SmallHD Accessories and ARRI Accessories, ideal for those looking for a non-twist mounting option.

Other standard mounting options include 1/4-20" and 3/8-16" tapped holes.

Pair it with our RudyArm articulating arm for endless mounting options.

Solidly built with Anodized Aircraft Aluminum.

Mount to Leader 5333, 5330, 5381, 5380, 5382 models.

• Top Side Hole Pattern: 5333, 5330 models
• Bottom Side Hole Pattern: 5333, 5330, 5381, 5380, 5382 models

Outfitted with SmallHD 1/4" Pin-Lock to hard-mount our SmallHD 1/4 Pin-Lock 15mm Spud.

Other standard mounting options include ARRI 3/8" Pin-Lock and 1/4-20" and 3/8-16" tapped holes.

The SmallHD 1/4 Pin-Lock 15mm Spud comes with O-rings for customizing O-ring grooves. The O-ring selection allows you to control the 15mm clamp device: choose slip, friction or captive fit.

Pair it with our RudyArm articulating arm for endless mounting options.

Solidly built with Anodized Aircraft Aluminum.

This kit includes all screws, dowel pins, thread adapters to mount your Cinelock to ARRI, SmallHD and various cheese plate mounting patterns (1/4 to 1/4, 1/4 to 3/8, 3/8 to 3/8) within .44" to 1" spacing.

Non-Twist Cradle adds 0.32" / 8mm stacking height.

Screws Included
1x 3/8-16" x 3/8" Cinelock Socket Screw (Note: Can be used in place of slotted screw for regular 3/8 Cinelock use!)
1x 3/8-16" x 7/8" Cinelock Socket Screw
1x 1/4-20" x 3/4" Cinelock Socket Screw
2x 1/4-20" x 3/8" Button Head Socket Screw
1x 1/4 to 3/8" Thread Adapter
2x SmallHD Dowel Pins (Dowel pins are provided loose. Recommended to set in place with Loctite before use. Can be then knocked out if needed)
2x 3mm Arri Dowel Pins (Dowel pins are provided loose. Recommended to set in place with Loctite before use. Can be then knocked out if needed)
3x #2-56" x 3/8" Phillips Flat Head Screw (used to replace 16x9 Cinelock screws to mount non-twist cradle directly to Cinelock Female cradle for ARRI use)

3/8-16" Socket Screws are tightened using a 7/32" hex key.

1/4-20" Socket screws are tightened using a 5/32" or 4mm hex key.

Solidly built with Anodized Aircraft Aluminum & Stainless Steel.

The egg shaped Arri Pin-Loc base gives the 15mm rod four .72 offset positions to mount lens control rods to the camera.

Create extra rod positions for the camera assistant.

3/8-16″ Pin-Loc thread is tightened by using a 4mm or 5/32″ hex key to Arri 3/8 mounting pattern.

15mm Rod has 3/8 thread on front end for adding CineTape or Cine RT systems.

Extend 15mm Rod via 3/8 thread with our 15mm Extension Rods, available in 4", 6" & 8".

Solidly built with Anodized Aircraft Aluminum.

Rudy Arm Fluid Head Mount Adapter - Full Kit includes:

• Fluid Head Mount Adapter
  
  • Mounting Post
  • Threaded T-Knob Spindles
    • M6, M8, 5/16 and 5/16-22 Vinten threaded spindles
  • Additional O-Rings and Washers included

The Fluid Head Monitor Mount is compatible with all sizes and types of fluid heads

The Fluid Head Monitor Mount comes with M6, M8, 5/16-18 and 5/16-22 (V) T-Knob threaded spindles. Slide the correct spindle into adapter and mount O-Ring to the front of the spindle to make it captive. The fluid head monitor mount is ready to use on any fluid head.

If needed, shorten/lengthen spindle thread by adding/removing extra washers at T-Knob neck.

Fluid Head Pan Handle threads by Brand:

• Manfrotto - M6
• O'Connor - 5/16-18
• Vinten - 5/16-22
• Sachtler - M8
• Camgear - M8
• Miller - M8
• Acebil - M8
• Secced - M8
• E-Image - M8
• Varizoom - M8
• Benro Models - K6, K7, K8, H8, H10, BV8, BV10, S6, S8, BV4, BV6 - M8
• Benro Models -S2, S4, KH25N, KH26NL - M6

Use Your Left Handle Rosette

The Fluid Head Monitor Mount connects to the left or right handle rosette on your fluid head and is fully adjustable.

Pair it with our RudyArm articulating arm for endless mounting options.

Solidly built with Anodized Aircraft Aluminum.

SmallHD 1/4" Pin-Loc compatible, ideal choice for a solid, non-twist mounting option for your SmallHD monitor.

Warning: We are getting reports that Ultra 10 and Ultra 7 monitors feature a new mounting pattern from SmallHD, which will not fit our SmallHD 1/4 Pin-Loc parts. (our parts had a closer pin fit to the previous pattern design). SmallHD has now updated these monitors with the pattern that fits the new Arri 1/4 Pin-Loc standard. Please consider our Arri 1/4″ Pin-Loc 15mm Rod Clamp for these monitors instead.

Pair it with our RudyArm articulating arm for endless mounting options.

Solidly built with Anodized Aircraft Aluminum.

Build your own rig with our variety of 15mm rods and accessories. All our accessories are compatible and work together to help you build your master rig!

Comes with O-rings for customizing O-ring grooves. The O-ring selection allows you to control the 15mm clamp device: choose slip, friction or captive fit.

Available in 6", 10", and 12"

Solidly built with Anodized Aircraft Aluminum.