Rack Box - Upgrade Innovations https://upgradeinnovations.com/product-tag/rack-box/ Innovative Cinematography Gear Wed, 28 Oct 2026 03:41:26 +0000 en-US hourly 1 https://upgradeinnovations.com/wp-content/uploads/cropped-Upgrade-Innovations-512_512-1-64x64.png Rack Box - Upgrade Innovations https://upgradeinnovations.com/product-tag/rack-box/ 32 32 8U Rack Box Cover Panel https://upgradeinnovations.com/product/8u-rackbox-cover-panel/ https://upgradeinnovations.com/product/8u-rackbox-cover-panel/#respond Fri, 11 Sep 2026 17:10:34 +0000 https://upgradeinnovations.com/?post_type=product&p=13009 The 8U Rack Box Cover Panel is an add-on kit that closes off the front or back of your Rack Box, protecting your equipment during transport from strapping and impacts.

Each kit covers one side. Order two to cover both front and back.

The panel lifts out with minimal force and docks onto the side of the Rack Box, so the cover has a home when it's not in use. The Rack Box locating screw system still works with the cover panel installed, so stacking is unaffected.

Fits the 8U Rack Box 14 (SKU 14765) and 8U Rack Box 17 (SKU 14720).

Rack Box Assembly Instructions (see page 7 for Rack Box Cover Panel Section)

Important: Prior to purchase, please read disclaimers below

  • The 10/50 rails mount ahead of the rack rails and cover the rack rail screw holes on that face. To add or remove rack components, the 10/50 rails need to come off first.
  • The cover panel backing screws project slightly into the highest and lowest rack unit. All rack units remain usable, but components needing full-depth clearance at that position — a drawer, for example — may not fit. Plan your rack position accordingly.

The post 8U Rack Box Cover Panel appeared first on Upgrade Innovations.

]]>
8U Rack Box Cover Panel kit with ABS panel, two 10/50 extrusion rails and fasteners
8U Rack Box with the Cover Panel installed on the front, front angled view
8U Rack Box with the cover panel parked on the side and the front open
Cover panel parked on side of Rack Box using side keepers
4U Rack Box with cover panel parked on the side keepers, front angled view showing the open rack
8U Rack Box with cover panel parked on the side keepers, angled view
Cover panel width dimensions — 19.94 inches with one panel
Side dimension drawing: one cover panel on Rack Box 14, 15 inch rack rail to cover panel
Side dimension drawing: one cover panel on Rack Box 17, 18 inch rack rail to cover panel
Two cover panels installed on Rack Box — 20.4 inch total width
Side dimension drawing: two cover panels on Rack Box 14, 16 inch cover panel to cover panel
Side dimension drawing: two cover panels on Rack Box 17, 19 inch cover panel to cover panel

8U Rack Box Cover Panel

USD$165.00

The 8U Rack Box Cover Panel is an add-on kit that closes off the front or back of your Rack Box, protecting your equipment during transport from strapping and impacts.

Each kit covers one side. Order two to cover both front and back.

The panel lifts out with minimal force and docks onto the side of the Rack Box, so the cover has a home when it’s not in use. The Rack Box locating screw system still works with the cover panel installed, so stacking is unaffected.

Fits the 8U Rack Box 14 (SKU 14765) and 8U Rack Box 17 (SKU 14720).

Rack Box Assembly Instructions (see page 7 for Rack Box Cover Panel Section)

Important: Prior to purchase, please read disclaimers below

  • The 10/50 rails mount ahead of the rack rails and cover the rack rail screw holes on that face. To add or remove rack components, the 10/50 rails need to come off first.
  • The cover panel backing screws project slightly into the highest and lowest rack unit. All rack units remain usable, but components needing full-depth clearance at that position — a drawer, for example — may not fit. Plan your rack position accordingly.
Currency
SKU: 16020 Categories: , Tag:

What’s included

A single kit includes the ABS cover panel, two 10/50 aluminum extrusion rails that mount to either the front or back of the Rack Box, and the fasteners needed to locate the panel and park it on the side.

How it works

The 10/50 rails mount to the front or back face of the Rack Box, sitting ahead of the rack rails. The cover panel flexes slightly into the slots on both rails and is held in place by backing screws on the top and bottom cross tubes, which prevent it from being pushed inward. Two finger holes in the panel let you pull it back out.

When you don’t need the cover, slide the panel onto the side keepers on either side of the Rack Box, where it locks over a central locator and stays put in transit.

Note on rack clearance

The cover panel backing screws project slightly into the highest and lowest rack unit. All rack units remain usable, but components requiring full-depth clearance at that position — a drawer, for example — may not fit. Plan your rack position accordingly.

Optional: skip the side parking hardware

The side keepers, glide pins, and locator only matter if you want to park the panel on the side. Skip them and the Rack Box stays at its base 19.5″ width — worth considering for a tight cart slot or fixed case.

10/50 extrusion rails mount ahead of the rack rails on the front or back face

Park the cover panel on the side of the Rack Box when not in use, using the included hardware

Backing screws on the top and bottom cross tubes locate the cover panel once it’s slotted into the 10/50 rails.

The Rack Box locating screws remain usable with the cover panel installed, so boxes still stack

One Rack Box Cover Panel Specifications

Purchase a single Rack Box Cover Panel to attach to either the front or back of your Rack Box.

Weight of One Cover Panel Kit: 1.5kg / 3.3lbs
Total Width, one cover panel: 19.94″ (adds 0.44″ over base Rack Box width)
Rack Rail to Cover Panel — Rack Box 14: 15″
Rack Rail to Cover Panel — Rack Box 17: 18″

Two Rack Box Cover Panel Specifications

Purchase two Rack Box Cover Panels to attach to both the front and back of your Rack Box.

Weight of Two Cover Panel Kits: 3kg / 6.6lbs
Total Width: 20.4″ (adds 0.44″ per side)
Cover Panel to Cover Panel — Rack Box 14: 16″
Cover Panel to Cover Panel — Rack Box 17: 19″

You may also like…

Related products

The post 8U Rack Box Cover Panel appeared first on Upgrade Innovations.

]]> https://upgradeinnovations.com/product/8u-rackbox-cover-panel/feed/ 0 6U Rack Box Cover Panel https://upgradeinnovations.com/product/6u-rackbox-cover-panel/ https://upgradeinnovations.com/product/6u-rackbox-cover-panel/#respond Fri, 11 Sep 2026 17:02:37 +0000 https://upgradeinnovations.com/?post_type=product&p=13008 The 6U Rack Box Cover Panel is an add-on kit that closes off the front or back of your Rack Box, protecting your equipment during transport from strapping and impacts.

Each kit covers one side. Order two to cover both front and back.

The panel lifts out with minimal force and docks onto the side of the Rack Box, so the cover has a home when it's not in use. The Rack Box locating screw system still works with the cover panel installed, so stacking is unaffected.

Fits the 6U Rack Box 14 (SKU 14705) and 6U Rack Box 17 (SKU 14715).

Rack Box Assembly Instructions (see page 7 for Rack Box Cover Panel Section)

Important: Prior to purchase, please read disclaimers below

  • The 10/50 rails mount ahead of the rack rails and cover the rack rail screw holes on that face. To add or remove rack components, the 10/50 rails need to come off first.
  • The cover panel backing screws project slightly into the highest and lowest rack unit. All rack units remain usable, but components needing full-depth clearance at that position — a drawer, for example — may not fit. Plan your rack position accordingly.

The post 6U Rack Box Cover Panel appeared first on Upgrade Innovations.

]]>
6U Rack Box Cover Panel kit with ABS panel, two 10/50 extrusion rails and fasteners
6U Rack Box with the Cover Panel installed on the front, front angled view
6U Rack Box with the cover panel parked on the side and the front open
Cover panel parked on side of Rack Box using side keepers
4U Rack Box with cover panel parked on the side keepers, front angled view showing the open rack
6U Rack Box with cover panel parked on the side keepers, angled view
Cover panel width dimensions — 19.94 inches with one panel
Side dimension drawing: one cover panel on Rack Box 14, 15 inch rack rail to cover panel
Side dimension drawing: one cover panel on Rack Box 17, 18 inch rack rail to cover panel
Two cover panels installed on Rack Box — 20.4 inch total width
Side dimension drawing: two cover panels on Rack Box 14, 16 inch cover panel to cover panel
Side dimension drawing: two cover panels on Rack Box 17, 19 inch cover panel to cover panel

6U Rack Box Cover Panel

USD$150.00

The 6U Rack Box Cover Panel is an add-on kit that closes off the front or back of your Rack Box, protecting your equipment during transport from strapping and impacts.

Each kit covers one side. Order two to cover both front and back.

The panel lifts out with minimal force and docks onto the side of the Rack Box, so the cover has a home when it’s not in use. The Rack Box locating screw system still works with the cover panel installed, so stacking is unaffected.

Fits the 6U Rack Box 14 (SKU 14705) and 6U Rack Box 17 (SKU 14715).

Rack Box Assembly Instructions (see page 7 for Rack Box Cover Panel Section)

Important: Prior to purchase, please read disclaimers below

  • The 10/50 rails mount ahead of the rack rails and cover the rack rail screw holes on that face. To add or remove rack components, the 10/50 rails need to come off first.
  • The cover panel backing screws project slightly into the highest and lowest rack unit. All rack units remain usable, but components needing full-depth clearance at that position — a drawer, for example — may not fit. Plan your rack position accordingly.
Currency
SKU: 16015 Categories: , Tag:

What’s included

A single kit includes the ABS cover panel, two 10/50 aluminum extrusion rails that mount to either the front or back of the Rack Box, and the fasteners needed to locate the panel and park it on the side.

How it works

The 10/50 rails mount to the front or back face of the Rack Box, sitting ahead of the rack rails. The cover panel flexes slightly into the slots on both rails and is held in place by backing screws on the top and bottom cross tubes, which prevent it from being pushed inward. Two finger holes in the panel let you pull it back out.

When you don’t need the cover, slide the panel onto the side keepers on either side of the Rack Box, where it locks over a central locator and stays put in transit.

Note on rack clearance

The cover panel backing screws project slightly into the highest and lowest rack unit. All rack units remain usable, but components requiring full-depth clearance at that position — a drawer, for example — may not fit. Plan your rack position accordingly.

Optional: skip the side parking hardware

The side keepers, glide pins, and locator only matter if you want to park the panel on the side. Skip them and the Rack Box stays at its base 19.5″ width — worth considering for a tight cart slot or fixed case.

10/50 extrusion rails mount ahead of the rack rails on the front or back face

Park the cover panel on the side of the Rack Box when not in use, using the included hardware

Backing screws on the top and bottom cross tubes locate the cover panel once it’s slotted into the 10/50 rails.

The Rack Box locating screws remain usable with the cover panel installed, so boxes still stack

One Rack Box Cover Panel Specifications

Purchase a single Rack Box Cover Panel to attach to either the front or back of your Rack Box.

Weight of One Cover Panel Kit: 1.15kg / 2.5lbs
Total Width, one cover panel: 19.94″ (adds 0.44″ over base Rack Box width)
Rack Rail to Cover Panel — Rack Box 14: 15″
Rack Rail to Cover Panel — Rack Box 17: 18″

Two Rack Box Cover Panel Specifications

Purchase two Rack Box Cover Panels to attach to both the front and back of your Rack Box.

Weight of Two Cover Panel Kits: 2.3kg / 5.1lbs
Total Width: 20.4″ (adds 0.44″ per side)
Cover Panel to Cover Panel — Rack Box 14: 16″
Cover Panel to Cover Panel — Rack Box 17: 19″

You may also like…

Related products

The post 6U Rack Box Cover Panel appeared first on Upgrade Innovations.

]]> https://upgradeinnovations.com/product/6u-rackbox-cover-panel/feed/ 0 8U Rack Box 17 https://upgradeinnovations.com/product/8u-rackbox-17/ https://upgradeinnovations.com/product/8u-rackbox-17/#respond Wed, 02 Sep 2026 23:53:02 +0000 https://upgradeinnovations.com/?post_type=product&p=12964 The 8U Rack Box 17 is a lightweight and low profile 19″ rack enclosure. The Rack Box frame is built out of 1″ square tubing with ARRI pin-loc mounting patterns. Side panels and panels on top and bottom are all removable for access from all sides.

10-32 threaded steel rack rails are recessed on the front and back by 1.8″ to ensure rack equipment does not protrude outside of Rack Box dimensions. The Rack Box 17 has a 17" rail to rail mounting depth. 10-32 rack mounting screws are included.

Compatible with our Apex Wide cart, coming soon. Get in touch for compatibility details.

Rack Box Assembly Instructions

Consider the following compatible addon:
8U Rack Box Cover Panel

The post 8U Rack Box 17 appeared first on Upgrade Innovations.

]]>
8U Rack Box 17, black 19 inch rack enclosure with 1 inch square tubing frame and side panels, front angled view
8U Rack Box 17 dimension drawing: 19.5 inch width, 20.6 inch length, 16.42 inch height
8U Rack Box 17 with side panels removed showing the open tubing frame, angled view
8U Rack Box 17 bare frame with all panels removed, showing the rack rails and ARRI pin-loc tubing
8U Rack Box 17 dimension drawing showing the 17 inch rail-to-rail depth and 1.8 inch rack rail recess
8U Rack Box 17 with top panel and cable passthrough, angled view from above
Rack Box mounted in an Apex cart under the top shelf with a power supply and rack equipment installed

8U Rack Box 17

USD$862.50

The 8U Rack Box 17 is a lightweight and low profile 19″ rack enclosure. The Rack Box frame is built out of 1″ square tubing with ARRI pin-loc mounting patterns. Side panels and panels on top and bottom are all removable for access from all sides.

10-32 threaded steel rack rails are recessed on the front and back by 1.8″ to ensure rack equipment does not protrude outside of Rack Box dimensions. The Rack Box 17 has a 17″ rail to rail mounting depth. 10-32 rack mounting screws are included.

Compatible with our Apex Wide cart, coming soon. Get in touch for compatibility details.

Rack Box Assembly Instructions

Consider the following compatible addon:
8U Rack Box Cover Panel

Currency
SKU: 14720 Categories: , Tag:

8U Rack Box 17 Specifications:
Rail to Rail: 17″ / 43.18cm
Rack Units: 8
Standard 19” rack width
Rack Opening Width (useable width): 17.75”
Product Weight: 8.8kg / 19.4lbs
Product Dimensions: 19.5″ W × 20.6″ L × 16.42″ H (add 0.28″ if using locating screws*)
*Two locating screws are included, mounted on the top frame’s front corners, for stacking another Rack Box on top.

Side panels and panels on top and bottom are removable for access from all sides.
The Rack Box frame is outfitted with ARRI pin-loc mounting patterns for lightweight accessories
10-32 threaded steel rack rails are recessed on the front and back by 1.8″ to ensure rack equipment does not protrude outside of Rack Box dimensions.
Top and bottom panels feature a cable passthrough hole, and provided cover plate.
Whaley Rail Clamps can be mounted to sections of the Rack Box 1″ tubing frame.
Two locating screws are included for stacking another Rack Box above. Adds 0.28″ in height when installed.

You may also like…

Related products

The post 8U Rack Box 17 appeared first on Upgrade Innovations.

]]> https://upgradeinnovations.com/product/8u-rackbox-17/feed/ 0 6U Rack Box 17 https://upgradeinnovations.com/product/6u-rackbox-17/ https://upgradeinnovations.com/product/6u-rackbox-17/#respond Wed, 02 Sep 2026 23:52:57 +0000 https://upgradeinnovations.com/?post_type=product&p=12963 The 6U Rack Box 17 is a lightweight and low profile 19″ rack enclosure. The Rack Box frame is built out of 1″ square tubing with ARRI pin-loc mounting patterns. Side panels and panels on top and bottom are all removable for access from all sides.

10-32 threaded steel rack rails are recessed on the front and back by 1.8″ to ensure rack equipment does not protrude outside of Rack Box dimensions. The Rack Box 17 has a 17" rail to rail mounting depth. 10-32 rack mounting screws are included.

Compatible with our Apex Wide cart, coming soon. Get in touch for compatibility details.

Rack Box Assembly Instructions

The post 6U Rack Box 17 appeared first on Upgrade Innovations.

]]>
6U Rack Box 17, black 19 inch rack enclosure with 1 inch square tubing frame and side panels, front angled view
6U Rack Box 17 dimension drawing: 19.5 inch width, 20.6 inch length, 12.92 inch height
6U Rack Box 17 with side panels removed showing the open tubing frame, angled view
6U Rack Box 17 bare frame with all panels removed, showing the rack rails and ARRI pin-loc tubing
6U Rack Box 17 dimension drawing showing the 17 inch rail-to-rail depth and 1.8 inch rack rail recess
6U Rack Box 17 with top panel and cable passthrough, angled view from above
Rack Box mounted in an Apex cart under the top shelf with a power supply and rack equipment installed

6U Rack Box 17

USD$825.00

The 6U Rack Box 17 is a lightweight and low profile 19″ rack enclosure. The Rack Box frame is built out of 1″ square tubing with ARRI pin-loc mounting patterns. Side panels and panels on top and bottom are all removable for access from all sides.

10-32 threaded steel rack rails are recessed on the front and back by 1.8″ to ensure rack equipment does not protrude outside of Rack Box dimensions. The Rack Box 17 has a 17″ rail to rail mounting depth. 10-32 rack mounting screws are included.

Compatible with our Apex Wide cart, coming soon. Get in touch for compatibility details.

Rack Box Assembly Instructions

Currency
SKU: 14715 Categories: , Tag:
6U Rack Box 17 Specifications:
Rail to Rail: 17″ / 43.18cm
Rack Units: 6
Standard 19” rack width
Rack Opening Width (useable width): 17.75”
Product Weight: 8kg / 17.6lbs
Product Dimensions: 19.5″ W × 20.6″ L × 12.92″ H (add 0.28″ if using locating screws*)
*Two locating screws are included, mounted on the top frame’s front corners, for stacking another Rack Box on top.
Side panels and panels on top and bottom are removable for access from all sides.
The Rack Box frame is outfitted with ARRI pin-loc mounting patterns for lightweight accessories
10-32 threaded steel rack rails are recessed on the front and back by 1.8″ to ensure rack equipment does not protrude outside of Rack Box dimensions.
Top and bottom panels feature a cable passthrough hole, and provided cover plate.
Whaley Rail Clamps can be mounted to sections of the Rack Box 1″ tubing frame.
Two locating screws are included for stacking another Rack Box above. Adds 0.28″ in height when installed.

You may also like…

Related products

The post 6U Rack Box 17 appeared first on Upgrade Innovations.

]]> https://upgradeinnovations.com/product/6u-rackbox-17/feed/ 0 4U Rack Box 17 https://upgradeinnovations.com/product/4u-rackbox-17/ https://upgradeinnovations.com/product/4u-rackbox-17/#respond Wed, 02 Sep 2026 23:52:15 +0000 https://upgradeinnovations.com/?post_type=product&p=12962 The 4U Rack Box 17 is a lightweight and low profile 19″ rack enclosure. The Rack Box frame is built out of 1″ square tubing with ARRI pin-loc mounting patterns. Side panels and panels on top and bottom are all removable for access from all sides.

10-32 threaded steel rack rails are recessed on the front and back by 1.8″ to ensure rack equipment does not protrude outside of Rack Box dimensions. The Rack Box 17 has a 17" rail to rail mounting depth. 10-32 rack mounting screws are included.

Compatible with our Apex Wide cart, coming soon. Get in touch for compatibility details.

Rack Box Assembly Instructions

Consider the following compatible addon:
4U Rack Box Cover Panel

The post 4U Rack Box 17 appeared first on Upgrade Innovations.

]]>
4U Rack Box 17, black 19 inch rack enclosure with 1 inch square tubing frame and side panels, front angled view
4U Rack Box 17 dimension drawing: 19.5 inch width, 20.6 inch length, 9.42 inch height
4U Rack Box 17 with side panels removed showing the open tubing frame, angled view
4U Rack Box 17 bare frame with all panels removed, showing the rack rails and ARRI pin-loc tubing
4U Rack Box 17 dimension drawing showing the 17 inch rail-to-rail depth and 1.8 inch rack rail recess
4U Rack Box 17 with top panel and cable passthrough, angled view from above
Rack Box mounted in an Apex cart under the top shelf with a power supply and rack equipment installed

4U Rack Box 17

USD$787.50

The 4U Rack Box 17 is a lightweight and low profile 19″ rack enclosure. The Rack Box frame is built out of 1″ square tubing with ARRI pin-loc mounting patterns. Side panels and panels on top and bottom are all removable for access from all sides.

10-32 threaded steel rack rails are recessed on the front and back by 1.8″ to ensure rack equipment does not protrude outside of Rack Box dimensions. The Rack Box 17 has a 17″ rail to rail mounting depth. 10-32 rack mounting screws are included.

Compatible with our Apex Wide cart, coming soon. Get in touch for compatibility details.

Rack Box Assembly Instructions

Consider the following compatible addon:
4U Rack Box Cover Panel

Currency
SKU: 14710 Categories: , Tag:

4U Rack Box 17 Specifications:
Rail to Rail: 17″ / 43.18cm
Rack Units: 4
Standard 19” rack width
Rack Opening Width (useable width): 17.75”
Product Weight: 7.38kg / 16.3lbs
Product Dimensions: 19.5″ W × 20.6″ L × 9.42″ H (add 0.28″ if using locating screws*)
*Two locating screws are included, mounted on the top frame’s front corners, for stacking another Rack Box on top.

Side panels and panels on top and bottom are removable for access from all sides.
The Rack Box frame is outfitted with ARRI pin-loc mounting patterns for lightweight accessories
10-32 threaded steel rack rails are recessed on the front and back by 1.8″ to ensure rack equipment does not protrude outside of Rack Box dimensions.
Top and bottom panels feature a cable passthrough hole, and provided cover plate.
Whaley Rail Clamps can be mounted to sections of the Rack Box 1″ tubing frame.
Two locating screws are included for stacking another Rack Box above. Adds 0.28″ in height when installed.

You may also like…

Related products

The post 4U Rack Box 17 appeared first on Upgrade Innovations.

]]> https://upgradeinnovations.com/product/4u-rackbox-17/feed/ 0 8U Rack Box 14 https://upgradeinnovations.com/product/8u-rackbox-14/ https://upgradeinnovations.com/product/8u-rackbox-14/#respond Wed, 02 Sep 2026 23:42:07 +0000 https://upgradeinnovations.com/?post_type=product&p=12961 The 8U Rack Box 14 is a lightweight and low profile 19″ rack enclosure. The Rack Box frame is built out of 1″ square tubing with ARRI pin-loc mounting patterns. Side panels and panels on top and bottom are all removable for access from all sides.

10-32 threaded steel rack rails are recessed on the front and back by 1.8″ to ensure rack equipment does not protrude outside of Rack Box dimensions. The Rack Box 14 has a 14" rail to rail mounting depth. 10-32 rack mounting screws are included.

Compatible with our Apex Wide and Apex Narrow carts, coming soon. Get in touch for compatibility details.

Rack Box Assembly Instructions

Consider the following compatible addon:
8U Rack Box Cover Panel

The post 8U Rack Box 14 appeared first on Upgrade Innovations.

]]>
8U Rack Box 14, black 19 inch rack enclosure with 1 inch square tubing frame and side panels, front angled view
8U Rack Box 14 dimension drawing: 19.5 inch width, 17.6 inch length, 16.42 inch height
8U Rack Box 14 with side panels removed showing the open tubing frame, angled view
8U Rack Box 14 bare frame with all panels removed, showing the rack rails and ARRI pin-loc tubing
8U Rack Box 14 dimension drawing showing the 14 inch rail-to-rail depth and 1.8 inch rack rail recess
8U Rack Box 14 with top panel and cable passthrough, angled view from above
Rack Box mounted in an Apex cart under the top shelf with a power supply and rack equipment installed

8U Rack Box 14

USD$862.50

The 8U Rack Box 14 is a lightweight and low profile 19″ rack enclosure. The Rack Box frame is built out of 1″ square tubing with ARRI pin-loc mounting patterns. Side panels and panels on top and bottom are all removable for access from all sides.

10-32 threaded steel rack rails are recessed on the front and back by 1.8″ to ensure rack equipment does not protrude outside of Rack Box dimensions. The Rack Box 14 has a 14″ rail to rail mounting depth. 10-32 rack mounting screws are included.

Compatible with our Apex Wide and Apex Narrow carts, coming soon. Get in touch for compatibility details.

Rack Box Assembly Instructions

Consider the following compatible addon:
8U Rack Box Cover Panel

Currency
SKU: 14765 Categories: , Tag:

8U Rack Box 14 Specifications:
Rail to Rail: 14″ / 35.56cm
Rack Units: 8
Standard 19” rack width
Rack Opening Width (useable width): 17.75”
Product Weight: 7.9kg / 17.4lbs
Product Dimensions: 19.5″ W × 17.6″ L × 16.42″ H (add 0.28″ if using locating screws*)
*Two locating screws are included, mounted on the top frame’s front corners, for stacking another Rack Box on top.

Side panels and panels on top and bottom are removable for access from all sides.
The Rack Box frame is outfitted with ARRI pin-loc mounting patterns for lightweight accessories
10-32 threaded steel rack rails are recessed on the front and back by 1.8″ to ensure rack equipment does not protrude outside of Rack Box dimensions.
Top and bottom panels feature a cable passthrough hole, and provided cover plate.
Whaley Rail Clamps can be mounted to sections of the Rack Box 1″ tubing frame.
Two locating screws are included for stacking another Rack Box above. Adds 0.28″ in height when installed.

You may also like…

Related products

The post 8U Rack Box 14 appeared first on Upgrade Innovations.

]]> https://upgradeinnovations.com/product/8u-rackbox-14/feed/ 0 6U Rack Box 14 https://upgradeinnovations.com/product/6u-rackbox-14/ https://upgradeinnovations.com/product/6u-rackbox-14/#respond Thu, 13 Aug 2026 05:33:39 +0000 https://upgradeinnovations.com/?post_type=product&p=12841 The 6U Rack Box 14 is a lightweight and low profile 19″ rack enclosure. The Rack Box frame is built out of 1″ square tubing with ARRI pin-loc mounting patterns. Side panels and panels on top and bottom are all removable for access from all sides.

10-32 threaded steel rack rails are recessed on the front and back by 1.8″ to ensure rack equipment does not protrude outside of Rack Box dimensions. The Rack Box 14 has a 14" rail to rail mounting depth. 10-32 rack mounting screws are included.

Compatible with our Apex Wide and Apex Narrow carts, coming soon. Get in touch for compatibility details.

Rack Box Assembly Instructions

Consider the following compatible addon:
6U Rack Box Cover Panel

The post 6U Rack Box 14 appeared first on Upgrade Innovations.

]]>
6U Rack Box 14, black 19 inch rack enclosure with 1 inch square tubing frame and side panels, front angled view
6U Rack Box 14 dimension drawing: 19.5 inch width, 17.6 inch length, 12.92 inch height
6U Rack Box 14 with side panels removed showing the open tubing frame, angled view
6U Rack Box 14 bare frame with all panels removed, showing the rack rails and ARRI pin-loc tubing
6U Rack Box 14 dimension drawing showing the 14 inch rail-to-rail depth and 1.8 inch rack rail recess
6U Rack Box 14 with top panel and cable passthrough, angled view from above
Rack Box mounted in an Apex cart under the top shelf with a power supply and rack equipment installed

6U Rack Box 14

USD$825.00

The 6U Rack Box 14 is a lightweight and low profile 19″ rack enclosure. The Rack Box frame is built out of 1″ square tubing with ARRI pin-loc mounting patterns. Side panels and panels on top and bottom are all removable for access from all sides.

10-32 threaded steel rack rails are recessed on the front and back by 1.8″ to ensure rack equipment does not protrude outside of Rack Box dimensions. The Rack Box 14 has a 14″ rail to rail mounting depth. 10-32 rack mounting screws are included.

Compatible with our Apex Wide and Apex Narrow carts, coming soon. Get in touch for compatibility details.

Rack Box Assembly Instructions

Consider the following compatible addon:
6U Rack Box Cover Panel

Currency
SKU: 14705 Categories: , Tag:

6U Rack Box 14 Specifications:
Rail to Rail: 14″ / 35.56cm
Rack Units: 6
Standard 19” rack width
Rack Opening Width (useable width): 17.75”
Product Weight: 7.25kg / 16.0lbs
Product Dimensions: 19.5″ W × 17.6″ L × 12.92″ H (add 0.28″ if using locating screws*)
*Two locating screws are included, mounted on the top frame’s front corners, for stacking another Rack Box on top.

Side panels and panels on top and bottom are removable for access from all sides.
The Rack Box frame is outfitted with ARRI pin-loc mounting patterns for lightweight accessories
10-32 threaded steel rack rails are recessed on the front and back by 1.8″ to ensure rack equipment does not protrude outside of Rack Box dimensions.
Top and bottom panels feature a cable passthrough hole, and provided cover plate.
Whaley Rail Clamps can be mounted to sections of the Rack Box 1″ tubing frame.
Two locating screws are included for stacking another Rack Box above. Adds 0.28″ in height when installed.

You may also like…

Related products

The post 6U Rack Box 14 appeared first on Upgrade Innovations.

]]> https://upgradeinnovations.com/product/6u-rackbox-14/feed/ 0 4U Rack Box Cover Panel https://upgradeinnovations.com/product/4u-rackbox-cover-panel/ https://upgradeinnovations.com/product/4u-rackbox-cover-panel/#respond Sat, 13 Jun 2026 03:27:51 +0000 https://upgradeinnovations.com/?post_type=product&p=12653 The 4U Rack Box Cover Panel is an add-on kit that closes off the front or back of your Rack Box, protecting your equipment during transport from strapping and impacts.

Each kit covers one side. Order two to cover both front and back.

The panel lifts out with minimal force and docks onto the side of the Rack Box, so the cover has a home when it's not in use. The Rack Box locating screw system still works with the cover panel installed, so stacking is unaffected.

Fits the 4U Rack Box 14 (SKU 14700) and 4U Rack Box 17 (SKU 14710).

Rack Box Assembly Instructions (see page 7 for Rack Box Cover Panel Section)

Important: Prior to purchase, please read disclaimers below

  • The 10/50 rails mount ahead of the rack rails and cover the rack rail screw holes on that face. To add or remove rack components, the 10/50 rails need to come off first.
  • The cover panel backing screws project slightly into the highest and lowest rack unit. All rack units remain usable, but components needing full-depth clearance at that position — a drawer, for example — may not fit. Plan your rack position accordingly.

The post 4U Rack Box Cover Panel appeared first on Upgrade Innovations.

]]>
4U Rack Box Cover Panel kit with 10/50 extrusion rails and fasteners
Rack Box Cover Panel installed on front of 4U Rack Box
4U Rack Box with cover panel installed on the front and 10/50 extrusion rails visible on the side
Cover panel parked on side of Rack Box using side keepers
4U Rack Box with cover panel parked on the side keepers, front angled view showing the open rack
10/50 extrusion rails mounted in front of rack rails
Cover panel width dimensions — 19.94 inches with one panel
Side dimension drawing: one cover panel on Rack Box 14, 15 inch rack rail to cover panel
Side dimension drawing: one cover panel on Rack Box 17, 18 inch rack rail to cover panel
Two cover panels installed on Rack Box — 20.4 inch total width
Side dimension drawing: two cover panels on Rack Box 14, 16 inch cover panel to cover panel
Side dimension drawing: two cover panels on Rack Box 17, 19 inch cover panel to cover panel

4U Rack Box Cover Panel

USD$135.00

The 4U Rack Box Cover Panel is an add-on kit that closes off the front or back of your Rack Box, protecting your equipment during transport from strapping and impacts.

Each kit covers one side. Order two to cover both front and back.

The panel lifts out with minimal force and docks onto the side of the Rack Box, so the cover has a home when it’s not in use. The Rack Box locating screw system still works with the cover panel installed, so stacking is unaffected.

Fits the 4U Rack Box 14 (SKU 14700) and 4U Rack Box 17 (SKU 14710).

Rack Box Assembly Instructions (see page 7 for Rack Box Cover Panel Section)

Important: Prior to purchase, please read disclaimers below

  • The 10/50 rails mount ahead of the rack rails and cover the rack rail screw holes on that face. To add or remove rack components, the 10/50 rails need to come off first.
  • The cover panel backing screws project slightly into the highest and lowest rack unit. All rack units remain usable, but components needing full-depth clearance at that position — a drawer, for example — may not fit. Plan your rack position accordingly.
Currency
SKU: 16010 Categories: , Tag:

What’s included

A single kit includes the ABS cover panel, two 10/50 aluminum extrusion rails that mount to either the front or back of the Rack Box, and the fasteners needed to locate the panel and park it on the side.

How it works

The 10/50 rails mount to the front or back face of the Rack Box, sitting ahead of the rack rails. The cover panel flexes slightly into the slots on both rails and is held in place by backing screws on the top and bottom cross tubes, which prevent it from being pushed inward. Two finger holes in the panel let you pull it back out.

When you don’t need the cover, slide the panel onto the side keepers on either side of the Rack Box, where it locks over a central locator and stays put in transit.

Note on rack clearance

The cover panel backing screws project slightly into the highest and lowest rack unit. All rack units remain usable, but components requiring full-depth clearance at that position — a drawer, for example — may not fit. Plan your rack position accordingly.

Optional: skip the side parking hardware

The side keepers, glide pins, and locator only matter if you want to park the panel on the side. Skip them and the Rack Box stays at its base 19.5″ width — worth considering for a tight cart slot or fixed case.

10/50 extrusion rails mount ahead of the rack rails on the front or back face

Park the cover panel on the side of the Rack Box when not in use, using the included hardware

Backing screws on the top and bottom cross tubes locate the cover panel once it’s slotted into the 10/50 rails.

The Rack Box locating screws remain usable with the cover panel installed, so boxes still stack

One Rack Box Cover Panel Specifications

Purchase a single Rack Box Cover Panel to attach to either the front or back of your Rack Box.

Weight of One Cover Panel Kit: 0.8kg / 1.8lbs
Total Width, one cover panel: 19.94″ (adds 0.44″ over base Rack Box width)
Rack Rail to Cover Panel — Rack Box 14: 15″
Rack Rail to Cover Panel — Rack Box 17: 18″

Two Rack Box Cover Panel Specifications

Purchase two Rack Box Cover Panels to attach to both the front and back of your Rack Box.

Weight of Two Cover Panel Kits: 1.6kg / 3.5lbs
Total Width: 20.4″ (adds 0.44″ per side)
Cover Panel to Cover Panel — Rack Box 14: 16″
Cover Panel to Cover Panel — Rack Box 17: 19″

You may also like…

Related products

The post 4U Rack Box Cover Panel appeared first on Upgrade Innovations.

]]> https://upgradeinnovations.com/product/4u-rackbox-cover-panel/feed/ 0 4U Rack Box 14 https://upgradeinnovations.com/product/4u-rackbox-14/ https://upgradeinnovations.com/product/4u-rackbox-14/#respond Sun, 31 May 2026 22:00:17 +0000 https://upgradeinnovations.com/?post_type=product&p=12598 The 4U Rack Box 14 is a lightweight and low profile 19″ rack enclosure. The Rack Box frame is built out of 1″ square tubing with ARRI pin-loc mounting patterns. Side panels and panels on top and bottom are all removable for access from all sides.

10-32 threaded steel rack rails are recessed on the front and back by 1.8″ to ensure rack equipment does not protrude outside of Rack Box dimensions. The Rack Box 14 has a 14" rail to rail mounting depth. 10-32 rack mounting screws are included.

Compatible with our Apex Wide and Apex Narrow carts, coming soon. Get in touch for compatibility details.

Rack Box Assembly Instructions

Consider the following compatible addon:
4U Rack Box Cover Panel

The post 4U Rack Box 14 appeared first on Upgrade Innovations.

]]>
4U Rack Box 14, black 19 inch rack enclosure with 1 inch square tubing frame and side panels, front angled view
4U Rack Box 14 dimension drawing: 19.5 inch width, 17.6 inch length, 9.42 inch height
4U Rack Box 14 with side panels removed showing the open tubing frame, angled view
4U Rack Box 14 bare frame with all panels removed, showing the rack rails and ARRI pin-loc tubing
4U Rack Box 14 dimension drawing showing the 14 inch rail-to-rail depth and 1.8 inch rack rail recess
4U Rack Box 14 with top panel and cable passthrough, angled view from above
Rack Box mounted in an Apex cart under the top shelf with a power supply and rack equipment installed

4U Rack Box 14

USD$787.50

The 4U Rack Box 14 is a lightweight and low profile 19″ rack enclosure. The Rack Box frame is built out of 1″ square tubing with ARRI pin-loc mounting patterns. Side panels and panels on top and bottom are all removable for access from all sides.

10-32 threaded steel rack rails are recessed on the front and back by 1.8″ to ensure rack equipment does not protrude outside of Rack Box dimensions. The Rack Box 14 has a 14″ rail to rail mounting depth. 10-32 rack mounting screws are included.

Compatible with our Apex Wide and Apex Narrow carts, coming soon. Get in touch for compatibility details.

Rack Box Assembly Instructions

Consider the following compatible addon:
4U Rack Box Cover Panel

Currency
SKU: 14700 Categories: , Tag:

4U Rack Box 14 Specifications:
Rail to Rail: 14″ / 35.56cm
Rack Units: 4
Standard 19” rack width
Rack Opening Width (useable width): 17.75”
Product Weight: 6.6kg / 14.6lbs
Product Dimensions: 19.5″ W × 17.6″ L × 9.42″ H (add 0.28″ if using locating screws*)
*Two locating screws are included, mounted on the top frame’s front corners, for stacking another Rack Box on top.

Side panels and panels on top and bottom are removable for access from all sides.

The Rack Box frame is outfitted with ARRI pin-loc mounting patterns for lightweight accessories
10-32 threaded steel rack rails are recessed on the front and back by 1.8″ to ensure rack equipment does not protrude outside of Rack Box dimensions.
Top and bottom panels feature a cable passthrough hole, and provided cover plate.
Whaley Rail Clamps can be mounted to sections of the Rack Box 1″ tubing frame.

Two locating screws are included for stacking another Rack Box above. Adds 0.28″ in height when installed.

You may also like…

Related products

The post 4U Rack Box 14 appeared first on Upgrade Innovations.

]]> https://upgradeinnovations.com/product/4u-rackbox-14/feed/ 0