MMS11 VESA Monitor Mount to 5/8″ Spigot – Twin Friction-Loc

USD$223.05

The MMS11 Twin Friction-Loc VESA Monitor Mount supports broadcast quality monitors up to 40 lb/18kg. The two-point adjustment design, allows for unlimited viewing positions, making it a preferred mounting option. Chosen by professionals and rental houses to mount VESA standard monitors to 5/8” (16mm) male spigots or baby pins. Customize mount to your needs by choosing between our four Monitor Plates to provide Landscape/Portrait and/or Quick Release functionality. For mobile cart applications where superior hold for higher load rating is needed, consider our Ball-Loc models.

Select from Mounting Options below to change the SKU #

Consider mounting accessories via non-twist baby pin or 15mm spud

12565

MMS 5/8 Baby Pin Non-Twist – M5 (link)

The MMS 5/8 Non-Twist Baby Pin can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5/32 or 4mm Hex Key. Once mounted to Monitor Mount, the top of the 5/8 Baby Pin also provides a 3/8 tapped thread for mounting accessories.

MMS 15mm Mounting Spud Non-Twist – M5 (link)

The MMS 15mm Non-Twist Mounting Spud can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5/32 or 4mm Hex Key. Once mounted to Monitor Mount, the top of the 15mm Mounting Spud also provides a 3/8 tapped thread for mounting accessories. Spuds come with captive and friction o-rings to keep accessories in place while adjusting or loosening.

Clear
    Reset options
Currency

Rental House Tested & Approved Our superior quality twin-hinge monitor mounting systems are made from aircraft aluminum. We use only high quality knobs and levers that will last for many years. All mounts are load rated making them a top choice for professionals and rental houses. They are designed to attach to 5/8″ or 16mm male spigots that are common on most c-stands. Our multiple hinge locking systems and mounting options allow you to “build your own” mount, that best fits your individual needs.

Threaded Holes – New Feature!
Mount accessories directly to our Monitor Mounts using the 1/4, 3/8 or M5 threaded hole. The M5 thread is for our new hard-mount 5/8 Baby Pin or 15mm Spud to provide a non-twist mounting option. Mount these new accessories via 5/32 or 4mm Hex Key. Our 5/8 Baby Pin and 15mm Spud also provide a 3/8 tapped thread for mounting accessories and provide clearance for our Landscape/Portrait Monitor Plates. Standard 1/4 & 3/8 threaded holes are also provided closer to the Monitor Plate (Note: Landscape/Portrait Monitor Plates will interfere with accessories mounted to 1/4 & 3/8 threads)

Friction Loc System The industry strong friction disks give you strong hold and convenience to set your monitor in almost any viewing position with fine adjustments.

VESA Standard Our VESA mounting plates are multi purpose and are compatible with 75/100mm standard. Adapters for 100 x 200 and 200 x 200mm are available. Our thumbscrews stay on the mounting plate with our industry favourite captive design.

Safety Cable Ready These models are all safety cable ready. The machined hole at the VESA mounting plate adapter allows you to feed a safety cable through for safe overhead mounting. Use in any application where safety is a concern.

Mounting Plate Options

Standard Option Our Standard mounting plate model comes with our VESA plate thumbscrews with our industry favorite captive design.

Landscape/Portrait Option – LP Swinger Our LP-Swinger model is studio and green-screen friendly. Quickly swing your monitor from the landscape to portrait position or level the monitor when on an uneven surface. This mounting option comes with built in adjustable friction and a locking knob to hold the monitor in place. Ideal for your green screen and stills work, as you can make use of the full monitor display screen.

Quick Release Option – QR The slim quick release plate mounts to the back of your monitor taking up little space. This allows you to use much smaller storage/transport cases while keeping setup and take-down time to a minimum. The quick release option is great for camera-digital carts and mobile trucks. It comes with a locking latch that has a “hold open” option as well as a safety screw. This solid quick release mounting option will pay for itself in no time, especially if time and space is an issue.

Quick Release + Landscape/Portrait Option – QR+LP Swinger Our latest mounting plate model combines the capabilities of the LP-Swinger model with the convenience of the Quick Release option. Keep setup and take-down time to a minimum, while making full use of the full monitor display screen by swinging your monitor from the landscape to portrait position.

Note

SmallHD 1300 Series Monitors To accommodate VESA 100mm pattern and still use the SmallHD Accessory Bracket (covers the top VESA 100mm pattern), check out our SmallHD 1300 Spacers. NOTE: Quick Release Monitor Plate Models require re-positioning of Safety Screw. Contact Upgrade Innovations for more details. Solidly built with Anodized Aircraft Aluminum & Stainless Steel. Supports up to 40 lb/18kg.

Reviews

There are no reviews yet.

Be the first to review “MMS11 VESA Monitor Mount to 5/8″ Spigot – Twin Friction-Loc”

Your email address will not be published. Required fields are marked *