Rental House Tested & Approved.
Our superior quality single-hinge monitor mounting systems are made from aircraft aluminum. We use only high quality knobs and levers that will last for many years. All mounts are load rated making them a top choice for professionals and rental houses. They are designed to attach to 5/8″ or 16mm male spigots that are common on most c-stands. Our multiple hinge locking systems and mounting options allow you to “build your own” mount, that best fits your individual needs.
Preferred Choice for Camera Assistants & C-Stand Applications

QR-L/P – Quick Release – Landscape/Portrait VESA Monitor Plate
Combine the capabilities of the LP-Swinger model with the convenience of the Quick Release option. Keep setup and take-down time to a minimum, while making full use of the full monitor display screen by swinging your monitor from the landscape to portrait position.

Friction-Loc System
The industry strong friction disks give you strong hold and convenience to set your monitor in almost any viewing position. Is best for fine adjustments and gives you 360 degree position lock down.

Quick Release Monitor Plate
The slim VESA Quick Release Monitor Plate fits to the back of your VESA 75/100mm monitor taking up little space, only adding 10mm/0.39″. This allows you to use much smaller storage/transport cases while keeping setup and take-down time to a minimum.

QR Locking Latch and Safety Thumbscrew
Secure monitor with a locking latch that has a “hold open” option, as well as a safety thumbscrew screw.

Recessed VESA Patterns
Spacers and longer M4 mounting screws are provided because mounting surfaces and the final mounting method may vary, such as recessed mounting patterns.

Locking Knob
Quickly loosen L/P knob to swing monitor from landscape to portrait mode and tighten to hold in place.

Adjustable Friction
Built in adjustable friction that can be fine tuned via a set screw with a 3mm hex key.

Supports broadcast & production quality monitors up to 45 lb/20kg.
“For over a year, I have put the Twin Friction-Loc with Quick Release to the test. It is a phenomenal support system for my SmallHD 1303 monitor, Boxx transmitter, Preston and CineRT display. That’s a lot of tech that needs a rock solid support—the mount performs flawlessly. A great investment for any focus puller’s arsenal.”
Ari Magder
Different models, different functionality
The MMS12 has multiple models to fit your needs. Choose between our four VESA Monitor Plates to provide Standard, Landscape/Portrait and/or Quick Release functionality.

Upgrade Friendly
Our monitor mounts are built to last, so we designed a system that allows for you upgrade your mounts in case your needs change. No need for Quick Release at the moment? Work off your current budget and upgrade your mount with a different VESA Monitor Plate at a future date.
Accessories

VESA Adapter Set – 200x100mm & 200x200mm
The adapter set allows you take our VESA plates and expand it to either 200mm x 100 mm or 200mm x 200mm.

VESA Adapter Set – 400x200mm & 400x300mm & 400x400mm
The adapter set allows you take our VESA plates and expand it to either 400mm x 200 mm, 400mm x 300mm or 400mm x 400mm.

VESA Adapter Set – 300x200mm & 300x300mm
The adapter set allows you take our VESA plates and expand it to either 300mm x 200 mm or 300mm x 300mm.
Quick Release Assembly Instructions
FDMI VESA Mounting Compliance
Spacers and longer M4 mounting screws are provided because mounting surfaces and the final mounting method may vary. Prior to install, check mounting interface, mounting hole pattern and screw length to comply with FDMI Standards. Failure to do so may result in damage to monitor or improper mounting to support applied loads.
Components Included with QR Monitor Plate
Flat Head Phillips – various lengths (M4 x 10mm x4, M4 x 20mm x 4), Aluminum Spacers x4
Supports up to 45 lb/20kg.
Weight: 0.625kg/1.378lbs
Solidly built with premium 6061 aircraft aluminum, Mil-Spec anodizing & stainless steel hardware.
Made in Canada. NAFTA Qualified. CETA Qualified.
Reviews
There are no reviews yet.