The frame attaches via 13″ vertical posts (1.5″ OD) that integrate with the Vertical Magliner without any modifications to the cart frame — the posts mount using a set of M6 bolts and nuts. Whaley Rail Corner Clamps let you position the 21.25″ horizontal rail anywhere along the posts, and each Swing Arm attaches independently to the rail so you can line up monitors of different sizes exactly where you need them.

Every Swing Arm uses our ball-locking hinge system: unclamp it and the arm floats freely to fold monitors inward for cart moves; clamp it and the arm locks solid, with 10-degree intervals for fine positioning. The Whaley Rail Glide Clamp adds a second axis of adjustment, sliding smoothly along the arm on rolling bearings so monitors can be repositioned in view mode and cleared of obstructions when folding into packed mode.

Mount your monitors using the included 3″ Whaley 3/8 Pin-Loc Baby Pin along with our Ball-Lock Monitor Spigot Mounts and Quick Release VESA Plates, a positive-lock system built to hold steady under both static and moving loads. Pair it with the MMS09 VESA Mount, MMS11-MC VESA Mount, or Quick Release VESA Plate depending on your setup.

• Mount two monitors on your Vertical Magliner cart
• Reposition and fold monitors between view and pack mode using the Glide Clamp and Swing Arm hinge
• Ball-lock system keeps monitors secure during transport
• Built-in leveling adjustment keeps monitors aligned
• Installs directly onto the Magliner frame with M6 hardware — no cart modifications required

Weight: 4.81kg / 10.60lbs
Swing Arm Weight Load Rating: 12kg / 26.45lbs

[learn_more caption="Consider adding our Mobile/Cart VESA Spigot Ball-Lock Monitor Mounts"]

Single Hinge MMS09 VESA Monitor Mount to 5/8″ Spigot – Ball-Loc

The MMS09 Ball-Loc VESA Monitor Mount supports broadcast quality monitors up to 77 lb/35kg, designed specifically for mobile cart/truck applications.

Twin Hinge MMS11-MC VESA Monitor Mount to 5/8″ Spigot – Twin Ball-Loc

The MMS11-MC Twin Ball-Loc VESA Monitor Mount supports broadcast quality monitors up to 77 lb/35kg, designed specifically for mobile cart/truck applications. The two-point adjustment design, allows for unlimited viewing positions, making it a preferred mounting option.

Baby Pin Pan Lock Clamp

Baby pin mounting is common on set; however, these mounting systems can suffer on mobile applications where spigot tie down knobs inevitably loosen from mobile forces. The Baby Pin Pan Lock Clamp (link) limits the mount from panning on the baby pin and will keep monitors in the desired orientation.

[/learn_more]

The post Whaley Rail – Swing Arm Monitor Frame – Vertical Magliner appeared first on Upgrade Innovations.

The post Whaley Rail Vertical Post – Shape (Set of Two) appeared first on Upgrade Innovations.

Build the Whaley Rail frame system to the Shape Wagon, making use of the carts corner deck clamps on the top deck. For further information on the assembly process, check out the Whaley Rail II - Shape Wagon Assembly Instructions.

NEW - Whaley Rail frame systems now include our innovative Whaley 3/8 Pin-Loc Baby Pin, a non-twist baby pin designed for the Whaley Rail system. Whaley Pin-Loc is using the ARRI standard pin-loc spacing, with a longer 3/8" male thread to provide added anchor strength.

The Whaley Rail II system is designed to integrate with our popular Ball-Lock Monitor Spigot Mounts and Quick Release VESA Plates. The Ball-Lock system is a positive-lock system for rock solid monitor support when static and dynamic forces are at play. Check out the MMS09 VESA Mount, MMS11-MC VESA Mount and the Quick Release VESA Plate.

Weight:
Shape Wagon Single Rail - 3.16kg/6.97lbs
Shape Wagon Double Rail - 4.22kg/9.3lbs

Build your workstation the way you’ve always wanted.

[learn_more caption="Consider adding our Mobile/Cart VESA Spigot Ball-Lock Monitor Mounts"]

Single Hinge MMS09 VESA Monitor Mount to 5/8″ Spigot – Ball-Loc

The MMS09 Ball-Loc VESA Monitor Mount supports broadcast quality monitors up to 77 lb/35kg, designed specifically for mobile cart/truck applications.

Twin Hinge MMS11-MC VESA Monitor Mount to 5/8″ Spigot – Twin Ball-Loc

The MMS11-MC Twin Ball-Loc VESA Monitor Mount supports broadcast quality monitors up to 77 lb/35kg, designed specifically for mobile cart/truck applications. The two-point adjustment design, allows for unlimited viewing positions, making it a preferred mounting option.

Baby Pin Pan Lock Clamp

Baby pin mounting is common on set; however, these mounting systems can suffer on mobile applications where spigot tie down knobs inevitably loosen from mobile forces. The Baby Pin Pan Lock Clamp (link) limits the mount from panning on the baby pin and will keep monitors in the desired orientation.

[/learn_more]

[learn_more caption="Consider adding our Rudy Arm - 15mm Mounting System"]

Make use of our Rudy Arm for holding scopes, GUI monitors, Iris handsets and other smaller accessories. Take advantage of the Arri 3/8 Pin-Loc patterns on the Whaley Rail by solid mounting our Rudy Arm with the Arri 3/8 15mm mounting spuds. Our innovative and trusted Ball-Loc Pivot Clamp will ensure your accessories are held in place.

The Rudy Arm system is interchangeable so you can use this arm in conjunction with other Rudy Arm components and 15mm accessories. Build possibilities are truly endless with the entire arm being a 15mm mounting surface (always check load rating when re-configuring parts).
[/learn_more]

The post Whaley Rail Monitor Mounting Frame – Shape Wagon appeared first on Upgrade Innovations.

The frame attaches via 30″ vertical posts (1.5″ OD) that dock directly into your Inovativ Deploy's existing clamps, no drilling, no extra hardware. Whaley Rail Corner Clamps let you position the 26″ horizontal rail anywhere along the posts, and each Swing Arm attaches independently to the rail so you can line up monitors of different sizes exactly where you need them.

Every Swing Arm uses our ball-locking hinge system: unclamp it and the arm floats freely to fold monitors inward for cart moves; clamp it and the arm locks solid, with 10-degree intervals for fine positioning. The Whaley Rail Glide Clamp adds a second axis of adjustment, sliding smoothly along the arm on rolling bearings so monitors can be repositioned in view mode and cleared of obstructions when folding into packed mode.

Mount your monitors using the included 3″ Whaley 3/8 Pin-Loc Baby Pin along with our Ball-Lock Monitor Spigot Mounts and Quick Release VESA Plates, a positive-lock system built to hold steady under both static and moving loads. Pair it with the MMS09 VESA Mount, MMS11-MC VESA Mount, or Quick Release VESA Plate depending on your setup.

• Mount two monitors on your Inovativ Deploy cart
• Reposition and fold monitors between view and pack mode using the Glide Clamp and Swing Arm hinge
• Ball-lock system keeps monitors secure during transport
• Built-in leveling adjustment keeps monitors aligned

Weight: 5.59kg / 12.32lbs
Swing Arm Weight Load Rating: 12kg / 26.45lbs

[learn_more caption="Consider adding our Mobile/Cart VESA Spigot Ball-Lock Monitor Mounts"]

Single Hinge MMS09 VESA Monitor Mount to 5/8″ Spigot – Ball-Loc

The MMS09 Ball-Loc VESA Monitor Mount supports broadcast quality monitors up to 77 lb/35kg, designed specifically for mobile cart/truck applications.

Twin Hinge MMS11-MC VESA Monitor Mount to 5/8″ Spigot – Twin Ball-Loc

The MMS11-MC Twin Ball-Loc VESA Monitor Mount supports broadcast quality monitors up to 77 lb/35kg, designed specifically for mobile cart/truck applications. The two-point adjustment design, allows for unlimited viewing positions, making it a preferred mounting option.

Baby Pin Pan Lock Clamp

Baby pin mounting is common on set; however, these mounting systems can suffer on mobile applications where spigot tie down knobs inevitably loosen from mobile forces. The Baby Pin Pan Lock Clamp (link) limits the mount from panning on the baby pin and will keep monitors in the desired orientation.

[/learn_more]

The post Whaley Rail – Swing Arm Monitor Frame – Inovativ Deploy appeared first on Upgrade Innovations.

The reducers are available for imperial based diameters in 1.25", 1" and 0.75", as well as metric based diameters in 35mm, 30mm and 25mm.

For the 1", 0.75", 30mm and 25mm reducer sizes, coloured O-rings (red, blue, green and yellow) are provided to colour code the reducers if desired. The O-ring can be cut into four pieces and pushed into the slots on the reducer.

The post Whaley Rail Flip Open Clamp Reducers appeared first on Upgrade Innovations.