The Door Ease Stick Lubricant from AGS is a clean, wax-based formula, which is ideal for lubricating screw threads and other metal on metal contacts. Mess-free application – solid stick glides on exactly where you need lubrication; won’t drip like oils

Safety Data Sheet

Replacement Spigot Mount Tie Down Knob for the following Spigot Adapters:

SKU 12990 and 13350 - Spigot Adapter to 15mm Ball-Loc Pivot Clamp
SKU 13495, 13525, 13530 - Spigot Mount to 1/4-20 and 3/8-16 Thread

The Whaley Rail Cable Guide is a cable organizing solution for the Whaley Rail frame. Attach the cable guide directly onto the square tubing and make use of the friction fit design for positioning.

Add the Brass Glide Cup, and the 1.5" Collar Clamp, to your existing Laptop Swing Arm system to add a flip open clamp stop to add additional support and to ease positioning movements.

Mount the brass glide cup by removing the M5 screw on the flip open clamp that would make contact with collar clamp, and re-mount screw through glide cup.

The Whaley Telescoping Header allows users to mount accessories via our Whaley cross rail to a single baby pin anchor point. The center spigot adapter is securely mounted to the cross rail with a 3/8 pin-lock baby pin and dowel pins for a non-twist setup.

The outer baby pins are connected to telescoping sections to help spread apart wireless receivers and devices when in use. The telescoping system has three stages: collapsed, middle and full extension and each side telescopes independently by depressing a spring button pin.

Length:
- Collapsed stage: 28.3"
- Middle stage: 37.9"
- Full extension stage: 47.5"

Baby Pin Spacing (distance from outer baby pin to center baby pin):
- Collapsed stage: 13.59"
- Middle stage: 18.38"
- Full extension stage: 23.18"

Supports up to 4kg / 8.82lbs at full extension (static load rating)
Weight: 1.098kg / 2.42lbs

The Collar Clamp Reducers are 3D printed, snap fit reducers that adapt our Collar Clamp to other industry standard OD tubing on C-stands, rolling stands and carts. Two identical reducer pieces are included in each kit to snap onto either side of the clamp.

The reducers are available for imperial based diameters in 1.25", 1" and 0.75", as well as metric based diameters in 35mm, 30mm and 25mm. A reducer for 1" Whaley Rail square tubing (1/8" corner radius) is also available.

Industry Tubing OD Database
Matthews C-stands - 1.25" Bottom Stage, 1" Middle State, 0.75" Top Stage
Matthews Monitor Stand II - 1.5" Bottom Stage, 1.25" Top Stage

Avenger C-stands - 35mm Bottom Stage, 30mm Middle Stage, 25mm Top Stage

Backstage Magliner - 1.25" Round Tube

The 1.5" Collar Clamp provides an ARRI 3/8 and ARRI 1/4 pin-loc mounting pattern for mounting accessories to 1.5" OD (outer diameter) round posts. Make use of this ARRI patterns to attach ARRI based Rudy Arm components or third party mini quick release systems such as LNKCine and Wedgie2.

Add the 1.5" Collar Clamp, and the Brass Glide Cup, to your existing Laptop Swing Arm system to add a flip open clamp stop to add additional support and to ease positioning movements.

Adapt to other tubing diameters with our Collar Clamp Reducers, available in 1" square, 1.25", 1", 0.75", 35mm, 30mm, and 25mm sizes.

Solidly built with premium 6061 aircraft aluminum, Mil-Spec anodizing & stainless steel hardware.

Made in Canada. CUSMA Qualified. CETA Qualified.

The 3" Baby Pin Arri 3/8" Pin-Loc Pattern is a non-twist baby pin, featuring a 3/8 tapped hole and male 3mm dowel pins at the ARRI 3/8 interface spacing.

This baby pin is designed to attach to our latest Whaley Header square tubing, which features 3/8 clearance holes with ARRI locating pin holes.

Comes with a 1.5" length socket button head 3/8 screw.

Solidly built with Anodized Aircraft Aluminum.

Made in Canada. CUSMA Qualified. CETA Qualified.

Made in Canada. CUSMA Qualified. CETA Qualified.